Travis Conner
Member

I think you have to put the cast iron infeed/outfeed tables on and level/align them but I think that's it. Mine was bought used, but I have a buddy...

Like I said it's all about that money. Even the factory cord that's supposed to be plugged into the wall was only like 3ft long. No way you could...

Can you use plywood in place of that mdf stuff everyone uses? I want to still put that laminated countertop stuff on.

If I paid for lift gate service they would be crediting back more than just the $50 charge I paid them.

But if they just dump it off then I'm going to reject the load.

60 gallon air compressor so like 600 pounds. I believe they do have pallet jacks it's how they move the items from the front of the truck to the back...

Everyone tries to flip the guy $20 but he doesn't ever take it. The donut idea may not be a bad idea. At the same time it's kind of like conning him...

Nice! They make combination castor/levelers so you get the best of both worlds.

No it wasn't going to work. Too wide.

That's the other thing is the jet 208HH planer is the same looking planer with 4 or 5 different brand names. Same thing with the jointer. The...

Let me know when you run out, I'll bring you a refill. 😁

Definitely not going to spend a bunch of money and then try and sneak by the court laws. Eventually someone will figure it out.

Went ahead and put same blade on the new saw, cuts just fine. Back to nice pre sanded cuts.

Wow it just sounds like a penny pinch kind of thing sonthats what I did.

So the right hand pushes forward and down and the left hand pushes at an angle against the fence? with push sticks of course. Now that I think about...

The manual is misleading it says the 5hp saw should be hard wired to the wall and now cord used. Well that may be fine and dandy if it's in a huge...

12 guage. He said it depends on the wire. Building wire is different than portable SOO and SJ wire. I was sitting there wondering why the factory...

Can't find many electricians in my area that will come out for $100 Or even $1000. They're cocky in my area.

Oh I forgot about that. Doesn't really matter, that 10 gauge cord can be taken off and used for something else one day if needed. Better to over do...