Hardly a plumber alive that would put some pipe dope on every fitting. I watched a video where the plumber added pipe dope to that rubber donut that...
Isn't there a plastic nut in the micro adjuster? Better be careful with what lubricant you add or it could make that nut brittle or cause it to fall...
Sure Tom, lots of them left. But they have to oil the thrust bearing just as often as anyone else. These sleeve bearings and sawdust just don't play...
In today's machinery, they use what at one time was called a safety head. Those came right after the square heads that could have a blade fly out. No...
Sure doesn't sound like a manufacturer. From the SpeTool website; JUCCI INTERNATIONAL CO., LTD., (International company of Hangzhou Fengchi Import &...
A little flour and water, paper machete, brushed on the paper will set it up nicely. Must be 50 videos or instructions on the internet of how to make...
“DISPENSING USING WEIGHT OR VOLUME MEASURESTo measure 105 Epoxy Resin®, 205 Fast Hardener® or 206 Slow Hardener® by weight, combine five parts resin...
You might have to cylinder so full that it will hydraulic lock and bend parts. You may have to remove a head or cyclinder to get that oil out before...
Self employed woodworker specializing in live edge furniture, mandolin family instruments, custom stair work. Moved from Cincinnati to Stout, Ohio in 1977 and established Rome Hill Studio where I continue to make saw dust every day.
Location:
Stout, Ohio
Interests:
Irish and Scottish music, native plants, digital recording