Kev Williams
Contributor

Windows 10? Is the computer online? One bad guess would be Microsoft may be invading your computer and pausing the copying-- Could the pause be...

get some of this from Home Depot, it's basically a 'safer' version of 32% muriatic acid-- and pick up a respirator mask, the fumes can be no fun!...

If I'm understanding correctly, the cable in box in the pic is protected only by the 100 amp main breaker-? Since you're selling, I would go...

with the exception of the "bad" one at the bottom, I did all these with my 40w Gravograph LS900; "bad" was the first piece of leather I ever...

Reminds me of Gallagher, who wondered on stage how we learned anything in 'shool- ;) to paraphrase, best I recollect-- "How does anyone here...

To be sure, sometimes the 'higher priced spread' is worth it- case in point is all the Gravograph machines I've owned spanning nearly 40 years, whose...

Not exactly sure why not tearing the Sheetrock paper is important? And while hammering 16p nails into lumber typically bends them which is conducive...

YES!! EzCad was designed to import DXF files-- Of all the file types you can import to EzCad, DXF is the ONLY type I've EVER used! Other than...

when I refer to a 2" lens, I'm speaking to it's focus distance. A 2" lens means prime focus is approx. 2" from the lens itself to the substrate. One...

My favorite car radio was the 'magic bar tuning' AM radio my friend had in his '59 Oldsmobile, had a pair of narrow bars on top, left bar scanned for...

try the rice thing, pull the battery cover and battery, if you can take it apart, take it apart, then put it in a bowl and cover cover it with rice...

When focusing, the prime focus distance should always be right at the material's surface, regardless of thickness. The reason is, an any point OTHER...

Check out this webpage, especially the pics & video of the Astro-Skeleton clock, most fascinating piece of machinery I've ever seen :D ...

I'm thinking he may have figured that out, as no 2nd post yet ;)

--do you/don't you have a drill press?

Looks like a tick to me, and since it's red, might be a deer tick (instead of a wood tick), and ticks do have 8 legs- >edit< -or, could be you...

I LOVE clocks, especially 'real' clocks ;) - our home is filled with them! Our real clocks include a Ridgeway Grandfather, a Howard Miller...

You barely missed #7: Willie Nelson- #4 Mike got right, Janis Joplin- #6, I'm not sure anyone will get: --Martha Stewart :D

I suppose this counts as 'levity' ;) Ran into some old pics, some reasonably recognizable, some not so much :) guess their names?

I consider fobs as very much a 'basic product', boil it all down, they're simply an ignition key to start your car! ;) - and for people like me, I'd...

I get plenty of use out of computers; my main gripe is the forced obsolescence built into them, and the manufacturer's ability to mess with them even...

Here ya go. Greens with beef and bacon bits on a bed of croutons... ;)

Just me I guess but it seems ridiculous that I can buy what I consider an overpriced phone 13, or a great many different varieties of brand new...

Good to know, been planning to replace the old non-slip pad in the master bathtub, I may try this instead--

My steel honeycomb bed in my 1390 Triumph is pretty gucked up after almost 9 years. I did find an effective cleaner recently, however: FLAME! I...

Lenses-- first, I have many lenses: one 70mm, one 100mm, three 150mm, two 220mm, one 290mm, and two 330mm... These numbers represent the approximate...

I have 4 cheap Chinese fiber lasers, and I'm doing work for more than one customer whose much-higher-$$ fiber laser 'went down again'. One customer...

Very nice! I had one of those once- Too bad it was the worst one ;)

So, my BIL has used Corel longer than I have, he taught ME to use it, he's up to version 20 now I think, and I know he uses Font Navigator. Anyway,...