Kev Williams
Contributor

I'll third the Super Clean, wonderful for emulsifying grease- :) However, 'grease' isn't what goops up on cutting table beds, it's wood sap and...

I've always been interested in 'cold' lasers, especially considering what 400-500 mW machines can do... 5 watts doesn't sound like much but it's 10x...

When I put shelves up, while I do put the long side down I never put in the bottom screws, just 2 more screws to remove and holes to fix later...

It's nice to want to help people-- a fix for this would be to offer to call someone, by YOUR fingers, and put them on speaker. I suppose the number...

Maybe a victim of a hurricane? Been plenty of those the past year...

I honestly haven't a clue on how to help, but I had a hard time figuring out what I was looking at, so I added some light to the pics, maybe it'll...

Irony: Needing to replace a $400 starter that's failed 3 times since last summer, but not wanting to buy a cheap Chinese $100 starter for fear it'll...

Yup- sounds like the solenoid isn't pushing the plunger mechanism & pinion into the flywheel for some reason, OR the pinion shear pin/key went, OR...

Sounds like a lot of money to fix a hole that an 88 cent cork would plug ;)

Some good ones here! I'm not sure if the twist ties were actually put on that chain BEFORE the axle shaft/bolt went bye-bye or just for the pic,...

Windows 10? Is the computer online? One bad guess would be Microsoft may be invading your computer and pausing the copying-- Could the pause be...

get some of this from Home Depot, it's basically a 'safer' version of 32% muriatic acid-- and pick up a respirator mask, the fumes can be no fun!...

If I'm understanding correctly, the cable in box in the pic is protected only by the 100 amp main breaker-? Since you're selling, I would go...

with the exception of the "bad" one at the bottom, I did all these with my 40w Gravograph LS900; "bad" was the first piece of leather I ever...

Reminds me of Gallagher, who wondered on stage how we learned anything in 'shool- ;) to paraphrase, best I recollect-- "How does anyone here...

To be sure, sometimes the 'higher priced spread' is worth it- case in point is all the Gravograph machines I've owned spanning nearly 40 years, whose...

Not exactly sure why not tearing the Sheetrock paper is important? And while hammering 16p nails into lumber typically bends them which is conducive...

YES!! EzCad was designed to import DXF files-- Of all the file types you can import to EzCad, DXF is the ONLY type I've EVER used! Other than...

when I refer to a 2" lens, I'm speaking to it's focus distance. A 2" lens means prime focus is approx. 2" from the lens itself to the substrate. One...

My favorite car radio was the 'magic bar tuning' AM radio my friend had in his '59 Oldsmobile, had a pair of narrow bars on top, left bar scanned for...

try the rice thing, pull the battery cover and battery, if you can take it apart, take it apart, then put it in a bowl and cover cover it with rice...

When focusing, the prime focus distance should always be right at the material's surface, regardless of thickness. The reason is, an any point OTHER...

Check out this webpage, especially the pics & video of the Astro-Skeleton clock, most fascinating piece of machinery I've ever seen :D ...

I'm thinking he may have figured that out, as no 2nd post yet ;)

--do you/don't you have a drill press?

Looks like a tick to me, and since it's red, might be a deer tick (instead of a wood tick), and ticks do have 8 legs- >edit< -or, could be you...

I LOVE clocks, especially 'real' clocks ;) - our home is filled with them! Our real clocks include a Ridgeway Grandfather, a Howard Miller...

You barely missed #7: Willie Nelson- #4 Mike got right, Janis Joplin- #6, I'm not sure anyone will get: --Martha Stewart :D

I suppose this counts as 'levity' ;) Ran into some old pics, some reasonably recognizable, some not so much :) guess their names?