roger wiegand
Contributor

There shouldn't be gaps to fill. Unlike mitered corners that invariably open and close with the seasons, the straight M&T type joint of a Shaker...

Gurgling makes me suspect a venting issue. Sounds like you've already checked that though. Beyond that it starts to get hard and expensive. A camera...

Maybe we could get together for a group buy? :D I've been hunting the used market for a while now. Found one older ~24" Centauro that had been...

I use the 1/2" blades. I wouldn't want to try and fully tension a 3/4" blade on my saw. I just got done replacing several bent and stripped parts as...

I got the extended bed on my Robust, it will do 52" between centers. Can't even imagine being happier with a lathe. Big bucks yes, but that pain is...

I imagine there are other blades that are as good, but I've come to rely on the wood slicers for critical cuts. I always keep a newish one around for...

Over the years I've worked with a vey small charitable organization that was founded to build and support a village school in Tanzania. The "bang for...

Well it's taken me approximately forever, but I just figured out that the machine I was thinking about as you guys talk about as a "wide belt sander"...

If you're buying in any kind of quantity it turns out (it took me a long time to discover this) that LTL truck freight is surprisingly fast and...

Many of us would be interested, I suspect. I hope you can work it out with Keith so it can be a public conversation.

I just use a hand plane, easier and less scary that a router.

Yes. I've kept it for at least a year with no special precautions. Suggest weighing the components when mixing small batches to keep the ratios...

I'd call whoever makes popsicle sticks.

I think cutting through the splines would look odd, at best. I'd certainly do a scale model mock-up first to see if I liked it. You'd need to have...

I moved both my catalog and storage disk a while ago but have little memory of how I did it. Catalog on a new SSD and picture storage onto a NAS....

I worked for many years without one, then bought one when I was trimming out our house with cherry A&C trim and was faced with a couple thousand feet...

I thought I'd died and gone to heaven when my network connection went from 300 baud to 1200.

I'd let the folks who want to use it as is have it for whatever exorbitant price they are willing to pay for beat up bug infected wood. Good white...

If you bend it under the edges and tack it in place there is no need for glue-- I'd think glue would be problematic because of the very different...

A hot attic on a hot summer day can do the trick-- or a glass-windowed van parked in full sun with the windows closed in the summer easily gets that...

If it were me I'd go the unvented roof route (as we have in our current house and shop), fill the bays with closed cell foam, than 2" of rigid foam...

1) 135 degrees for eight hours (IIRC, check the USDA web site) 2) fumigation with methyl bromide (you'll need to take it to a licensed pro...

I'm not going to be much help, as I am a complete novice at spray finishing. The Qualspray gun with PPS was my first gun and I have to say I'm...

Beautiful turning stock, but a bear to dry without cracking. Very much worth it if you succeed.

I'd be surprised if it had much longevity. I have a couple pieces done with it that the cats have beaten up pretty badly. Bona Traffic HD is...

Your best bet is to give the folks at Oneway a call. Real people there, they answer the phone and are quite helpful. They can probably supply the...

Some progress, but then things ground to a halt when the tensioner screw on my bandsaw broke :(. Things had been going along, but then utter failure...

Boy, if I could get one here at that price I'd just write a check. I've been looking for a good used one for many months now. Ocean freight would...