Peter Kuhlman
Contributor

Where is the darn LIKE button??????? :D

I had the original Woodpecker PRL chain drive model. Super heavy duty but kept having problems with it getting hard to operate as gummed up with dust...

That UJK model is what I was referring to. I was going to post a link but didn’t think that was allowed. Pete

With the Festool you use bags as well as the filter system. The filters can last an extremely long time depending upon usage. My old CT33 from about...

I would just use my track saw for this on full sized sheets. I would use a stop block or measure and mark with a knife to get accurate cuts. Could...

Makita has Star labeled batteries currently while the older full sized packs don’t have the Star label on the top of them. To use a Star labeled...

Eric - I am not sure that snipe is what you are describing. For me on my Delta snipe is seen as a few wavy cross divots at the beginning and end of...

Probably but that is how these job site saws are designed. It has a 2 1/4” ID port for the main dust collection so a full sized cyclone system is not...

If you want the official most accurate answer I would contact Woodpeckers or Incra. They both have great customer support and will know exactly what...

None of that looks to be part of the leg sets. They all appear to be from a miter gauge or miter slider. Red MDF boards and the unfinished board...

I am using both gauge cords and have never noticed any difference in flexibility. Was never looking for a difference so just have not felt it. If...