Jared Sankovich
Contributor

That scmi is broken and that Altendorf is one of the ones with phenolic ways.

I actually posted they (in my opinion) were not more difficult. If you have to fit each door, then yes they are going to take more time. Hanging...

Any suggestions for European hornets. They decimated my crop last year.

Yes, fit once and if square it's not even fitting it's just cutting the doors square and 0.120" undersized leaving .010" for cleanup so you end up...

JMHO but I don't find it any more difficult. Square is square. If you build square frames, and square doors it's not any more difficult than an...

You have that backwards, and your cited article even is in agreement. Higher rates mean less available cash, dropping the value. In this case...

True, but then it just moves to stile/vertical face frame width, and modular vs monolithic frame construction.

Im in agreement, but prefer inset (and beaded) to euro. As for the original question don't build modular boxes. When you do have two abutting...

I spray liquid copper for fireblight, rally 40wsp as a fungicide and Malathion and liquid sevin (carbaryl) as insecticide. Not sure if any of that...

And because this is a tilting machine it's really only important to have the spindle in "in tram" parallel to the axis of the tilt. The...

1) Missing button lower right on panel (on / off switch I'm guessing?) It's missing the e-stop button 2) How do I take off the saw blade?...

+2 or I guess 3. You can't go wrong with WR and yellow wheels.

I'd say this pretty well covers most applications. 4-15mm groover 20-39mm groover/tenon discs 125x60 alternating shear rebate head 120mm euro...

Obviously over 70mm you are finishing the mortise by hand, still better than doing it completely by hand, and relatively dust free in a occupied...

Nice first? shaper. Those heads certainly look like moulder heads bushed down to 1.25". Did it also come with the original fence?

I have the PC513 and xl700 both work well for mortise locks (the festool needing more depth, but being relatively dust free) The PC is real a one...

That doesn't work well in the US since 1. Most american fences can't be moved forward or back (just left and right) 2. Most US table saws are...

I'm not a huge fan of the current PC jig, but it works OK. The stamped metal stops needed shimed to match on mine.

The drawer bottom groove should always be face up and toward the stops.. meaning you will use both the left and right sides of the jig. Anyone who...

Pics 3,4, and 5 roughly resemble a firearm. High probability it's a photo recognition algorithm searching for guns.