My router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: chris hood Yesterday, 11:36 PMHow is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.
Last Post By: Patty Hann Today, 4:01 PMBeen watching Matteo for years and now many top players are recognizing him. I think hes 24 now. Video is not great and sound not great but I can hear whats going on. Very nice of Joe to bring him up and others that are spending time with him. Hes innovative. Very unique finger picking style....
Last Post By: Warren Lake Today, 12:21 PMI'm down to 2 routers and need a couple more. I have read the 690's aren't what they used to be. Suggestions?
Last Post By: Warren Lake Today, 2:16 PMHi all, I have a Laguna Cflux-3 that was giving me some intermittent issues turning the unit on and would take a few hits of the switch or remote control 'on' to get it to start up. Today, the motor won't start at all. I do get a 'beep' coming from the circuit board when turning it on and the...
Last Post By: Justin Rapp Today, 9:26 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I have found that a single point fence works best for me for resawing. Most of the time i use a Kreg version (7" Resaw Guide | KregTool.com Official
Earl McLain Today, 5:43 PMWhile reviewing different approaches in preparing card scrapers I found the method used by Rob Cosman to be the most involved. Basically he recommends
Steve Mathews Today, 5:23 PMPlease ping me if you have one you're not using.
Thanks,
Don Peters
I am selling this Powermatic PM-701 benchtop mortiser. It is in excellent condition with no issues whatsoever. I am including three mortising bits, 1/2",
Joel David Katz Today, 4:50 PMWay back I got a Rawlings glove and it really didn't need much breaking in. I just used it so much it that was all I had to do. we would play ball all
Jerome Stanek Today, 4:44 PM
Recommendations for sailboat for novice sailors
Thread Starter: Andrew NemethHello, I’m looking for advice and recommendations for a good plan or kit to construct a sailboat for a novice crew. My 10yo daughter went to sailing camp last summer and had a blast. It was a skills based camp that eventually leads to racing and ASA certification. They used what appeared to...
Last Post By: Maurice Mcmurry Yesterday, 8:31 PM