Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Jimmy Harris Yesterday, 11:46 AMI've got a well head cabinet/enclosure to make which is in a remote location, about a 2 mile hike through the mountains without any trails. I've spent a few hours making measurements, and we will likely make this in sections, and strap them to our backs and assemble it in the field. There is no...
Last Post By: Thomas McCurnin Yesterday, 9:57 PMSeems like the last decent option for a small bevel gauge at Blue Spruce is no longer available. Previously Vesper was the gold standard but he's no longer accepting orders. I use the Shinwa with the bottom locking screw and it's pretty good. I also ordered the folding Shinwa with the knurled...
Last Post By: Jim Koepke Yesterday, 7:01 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Koepke Yesterday, 7:58 PMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Jim Koepke Yesterday, 4:13 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Sounds like J. P. to me.
Ken Fitzgerald Today, 1:24 AMReceived a gift card- will cover the new sashigane square that I recently got.
Gave my son (father of four) a quality torpedo level and a
For my 20" Rockwell wood/metal bandsaw I used a 1 KVA 240X480V pri, 120/240V sec transformer for 120V control power & for a work light, wired
Rollie Meyers Yesterday, 11:32 PMI ended up going to Hansen Lumber (conveniently just down the street from me) and got some gorgeous local pine. The original wood is raised up on bricks
Aaron Liebling Yesterday, 10:57 PMNo, it's 9". Maybe 9.25". On initial inspection, it looks like the drive pulley wobbles, and there might be a small crack in the rim of the
Paul Schaefer Yesterday, 10:53 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 3:49 PM