With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
My friend in So. Dk. was given a fair amount of Osage Orange. He hauled home and called me to tell me how heavy it was. He said it had been in a barn for several years and was thrilled to have.
The next day his back was hurting severely. He lives in a small town that has pretty good medical care....
Hi folks,
I'm looking for advice on whether to ignore/repair/euthanize a misaligned Dewalt 735.
A couple of years ago, I bought a used Dewalt 735 from a guy who had already installed a byrd cutterhead on it. I've recently realized that it is out of parallel by ~0.013". Picture attached...
While reviewing different approaches in preparing card scrapers I found the method used by Rob Cosman to be the most involved. Basically he recommends flattening and polishing the 3 surfaces of each side, eventually using a 16000 grit Shapton stone. He also employs the Charlesworth ruler trick to...
Beds are mulched, but maple seed starts are off the chart this year. Using a hoe works, but makes a mess of the mulch. Really don't want to do this by hand. Anyone weed in mulch with the garden "weasel " tine style tool? Thanks brian
This is a bit behind the curve, with cordless tools taking over, but I have not come up with a good cord tie after decades and many attempts for extension
I do alot of glue ups ..it's all hardwood..oak..walnut..maple..cherry and about all hardwood..it really makes for a beautiful project like bowls...large
I took it to a machine shop and after looking at it he showed me were it was actually hitting because it was too long....he told me to grind it down where
Sections
Recent Articles
Recent Article Comments Widget
Recent Polls
Recent Blog Posts
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 8:46 PM