Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Ronald Blue Today, 9:43 AMMy router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: Ronald Blue Today, 8:39 AMHow is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.
Last Post By: Pat Germain Today, 3:01 PMI'm pondering the economics of a mill vs buying rough lumber at retail/wholesale. In the Bay Area, depending on where you shop hardwoods like Oak and walnut can run up to $15-18bf/ft, or more for the rift/quarter sawn stuff. If one is able to source your own logs, running your own mil and kiln...
Last Post By: Rod Sheridan Yesterday, 8:29 PMI just bought an outdoor Pizza oven. It's an Ooni which can burn wood, charcoal or propane. I plan to start with propane as get accustomed to the pizza oven. Eventually, I want to switch to wood at least occasionally. So, like everyone else on this forum, I always have a lot of cut offs in my...
Last Post By: Pat Germain Today, 3:05 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I just had a shop built in Southern California. I partnered with the builder to do a detached structure in my back yard. It is 990 sqft and is classified
Paul J Kelly Today, 3:05 PMI understand your points. As you mentioned, that snow blower should have been fixed under warranty. My pizza oven in brand new and still under warranty
Pat Germain Today, 3:05 PMDo you have actual, real world examples of this?
This is the point on which I'm disagreeing. I know this is something many people believe.
Bump $70 conus
Gary Howorka Today, 2:51 PMI mentioned a few of those things because I've received a lot of products which showed up manufactured other than as designed. I hate it, but anymore;
John C Cox Today, 2:41 PM
Dining room carver chairs - Take 2
Thread Starter: Derek CohenAbout a month ago I began a thread about designing and building two carver chairs to accompany the 6 bentwood chairs we have owned for the past 40 years. The chairs were purchased all those years ago along with a table, which is around 200 years old. We need a larger table, and time has come to...
Last Post By: Derek Cohen Today, 6:12 AM