Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Dan Friedrichs Yesterday, 4:13 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Koepke Yesterday, 5:36 PMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Maurice Mcmurry Yesterday, 8:02 PMI have a Laguna 14BX 2.5hp 14" bandsaw and a 3/4" Resaw King blade which was bought together with the bandsaw. It works very well and the 3/4" Resaw King blade cut very well although I don't have much experience with bandsaw and don't know how well other bandsaw cut. However, there is always a...
Last Post By: Bernie Kopfer Yesterday, 8:58 PMAfter last year's trip to this part of the country, a second trip is needed. Total trip recap is in this thread from 2023. https://sawmillcreek.org/showthread.php?301671-Looking-for-some-travel-tips-SC-TN-KY-WV I’m planning this second trip for the fall. I have about 16 days/nights I can be gone...
Last Post By: Michael Drew Yesterday, 2:47 PMAny particular reason you want to know? Oil based polyurethane can last decades in an unopened can. And you can usually tell when it's gone bad just
Jimmy Harris Today, 12:33 AMU haul has a service where you hire some of their guys to show up and help load or unload. Ask the high school football or wrestling coach. Pay them
Bill Dufour Today, 12:00 AMGF? plus more words to make it count.
Bill D
Sam, I replied to your message, but for some reason not getting a notification they are going out. It's yours if you still want it and yes I can help
Robert Hartmann Yesterday, 11:46 PMI would take the wood flooring and the subfloor out of the picture. I would bolt some ~5" round spacers directly to the concrete and make the spacers
Michael Schuch Yesterday, 11:30 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 10:02 AM