• Sections

  • Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    chris hood

    Router questions

    Thread Starter: chris hood

    My router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...

    Last Post By: chris hood Yesterday, 11:36 PM Go to last post
    Jerry Bruette

    Surveys

    Thread Starter: Jerry Bruette

    How is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.

    Last Post By: Dwayne Watt Today, 8:08 PM Go to last post
    Warren Lake

    hard not to love the blues

    Thread Starter: Warren Lake

    Been watching Matteo for years and now many top players are recognizing him. I think hes 24 now. Video is not great and sound not great but I can hear whats going on. Very nice of Joe to bring him up and others that are spending time with him. Hes innovative. Very unique finger picking style....

    Last Post By: Warren Lake Today, 12:21 PM Go to last post
    Bradley Gray

    PC 690 router replacement

    Thread Starter: Bradley Gray

    I'm down to 2 routers and need a couple more. I have read the 690's aren't what they used to be. Suggestions?

    Last Post By: Warren Lake Today, 2:16 PM Go to last post
    Haitham Jaber

    Oilstones sharpening

    Thread Starter: Haitham Jaber

    Hello, I wanted to share with you my experience with oilstones. As you might know I'm slowly transitioning to oilstones, from waterstones. After spending money in a set of Dan's Whetstones I was frustrutated because I couldn't get even the slightest burr on a blade coming out of a whole...

    Last Post By: John C Cox Today, 7:47 PM Go to last post
    Justin Rapp

    Laguna Dust Collector not going on

    Thread Starter: Justin Rapp

    Hi all, I have a Laguna Cflux-3 that was giving me some intermittent issues turning the unit on and would take a few hits of the switch or remote control 'on' to get it to start up. Today, the motor won't start at all. I do get a 'beep' coming from the circuit board when turning it on and the...

    Last Post By: Justin Rapp Today, 9:26 AM Go to last post

  • Recent Polls

    What are your thoughts? (Votes: 6)

    1. Been doing it like (or equivalent) this for years. (Votes: 4)

    2. Wow! Never thought of that. (Votes: 0)

    3. Been doing it with mirrors. (Votes: 2)

    4. Ain't got a boat, truck, care… (Votes: 0)

  • Recent Forum Posts

    Ken Fitzgerald

    Creeker’s past weeks accomplishments

    We have been on the road for 2 1/2 weeks and no shop time. Today as we came across central Montana on US-90, we topped a rise and the view to the south

    Ken Fitzgerald Today, 9:54 PM Go to last post
    Andrew Hughes

    Flattening an oilstone

    I remember a thread years ago about this topic.
    George Wilson suggested using a potters wheel to lap oil stones flat. Another suggestion was a

    Andrew Hughes Today, 9:31 PM Go to last post
    Christopher Herzog

    router shuts itself off

    I had a similar problem and found a broken wire in the router. It is an older one and the wire was brittle. Repair was simple to redo the wire and all

    Christopher Herzog Today, 9:26 PM Go to last post
    Warren Lake

    Sharpening Card Scrapers - Rob Cosman's Way

    Id look at more you tubes of other people. We flattened three sides. I think it was file first, then on a stone 3 sides then pull a burr with a burnisher

    Warren Lake Today, 9:20 PM Go to last post
    Rafael Herrera

    Flattening an oilstone

    It's not the diamonds that wear out, it's the substance, whatever that is, nickel plating? That holds the diamonds to the plate that wears out. The diamonds

    Rafael Herrera Today, 9:08 PM Go to last post

  • Recent Blog Posts