Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 12:56 PMOne of those sitting at the computer in the morning with a cup of coffee itching to buy a new tool ... So I come across this Veritas Scraper Burnisher for Turners and looked at a few videos reviews of it and thought why not. After reading a few reviews posted on this forum I later realized it was...
Last Post By: stephen thomas Today, 1:46 PMHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Jerry Bruette Today, 8:27 PMMy router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: Doug Garson Today, 9:01 PM:eek: too old and weak lol. well weak for sure! Cannot hurt to ask :) 6" jointer , Jet 50" cab saw..... fun huh. (no) well kind of. actually exciting! Friday or Sat or Sun ? I might be able to get a neighbor to help, but they are often very busy. I am in Van Alstyne. Beer Pizza $ ?
Last Post By: Jim Koepke Today, 1:32 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I have a Meber 16" bandsaw and want to upgrade it for a newer machine for resawing. I have a 14" old school Delta (made in the US) machine upgraded
Alan Heffernan Today, 9:05 PMIf you are dedicating this router to table use, you can bypass the internal switch and control the router with an external switch outside the dusty area.
Doug Garson Today, 9:01 PMThanks for everyone's input on the Rikon 70-1824 lathe. Having owned several Nova lathes and a Record Envoy lathe, I am now a proud owner of the Rikon
Harold Walsh Today, 8:55 PMHi Jimmy, I live in a large city and have an endless supply of urban hardwood logs, free for the asking from arborists.
Regards, Rod
Dining room carver chairs - Take 2
Thread Starter: Derek CohenAbout a month ago I began a thread about designing and building two carver chairs to accompany the 6 bentwood chairs we have owned for the past 40 years. The chairs were purchased all those years ago along with a table, which is around 200 years old. We need a larger table, and time has come to...
Last Post By: stephen thomas Today, 3:07 PM