Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Time for some levity
Thread Starter: Dave Anderson NH
With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 3:42 PM

Help Me Pick a Plow Plane or Is It a Plough Plane
Thread Starter: Thomas McCurnin
Typical use will be on 3/4 to 7/8" stock planing on edge for a a 1/4" groove about 3/8" deep for frame and panel construction. I'll also be using it for grooving a post, usually about 1.5" x 1.5" is typical, again to accept a panel for frame and panel construction. It needs to go both directions,...
Last Post By: Derek Cohen Today, 7:45 PM

How to replace Syder/Coupler on Supermax 16/32>?
Thread Starter: Thomas Colson
I have a Supermax 16/32 with a pretty clapped out rubber spyder-coupler. Little tiny pieces of rubber are coming out of it, which makes sense, I've used this like I stole it for the last 2 years. Any videos or instructions with pictures anywhere on how to do this that are deliberately hidden and...
Last Post By: Jerry Bruette Today, 4:13 PM

I hate rusty saws, but...
Thread Starter: Richard Hutchings
I just saw an ad for 7 rusty saws for $25 and I may not be able to resist. One has the thumbhole but broken horn. It might be worth buying the whole lot but I'll have to get better at cleaning them up. I hate the mess. Hopefully someone will buy them before I decide to bite the bullet.
Last Post By: Maurice Mcmurry Today, 9:51 AM

Solid Walnut bookshelf dados - is glue enough?
Thread Starter: Bill Brammer
Building 6 ft high, 28 in wide, 12 inch deep solid 3/4 inch walnut bookshelf , no adjustable shelves. I have dados for all shelves. The sides are a little bowed, requiring some pressure with clamps to pull them together with the dados. Not a ton, but some. I'm trying to decide if I need to add...
Last Post By: Jim Becker Today, 10:58 AM

Painters damaged original wood windows - ideas for a fix
Thread Starter: Tim Vanderet
Hi All, I've spent a lot of time reading and learning in these forums, so thank you to everyone who makes this a valuable resource. We are having some work done on our home in the SF Bay Area of California and our painters got overzealous with scraping the old paint off of the windows and...
Last Post By: Tom Bender Today, 7:35 AM

Bert Kemp

There is no available content written by Bert Kemp

Recent Polls
Recent Forum Posts

Return Air Baffle for CV1800

Ok y’all I gotta run. John I’ll get back to you on that. I’m liking the sound of that. Forgot the dimensions. It’s constructed from 1/2” mfd. Interior
Bryan Cleveland Today, 8:15 PM

Return Air Baffle for CV1800

Yes I will definitely be building with screws. Crappy part is that the bottom plate will either have to be attached to the garage floor with either construction
Bryan Cleveland Today, 8:05 PM

removing iron stains from concrete garage floor?

I have a rotary surface cleaner attachment for my pressure washer that works very well for cleaning concrete. You can use muratic acid on any real tough
Mitch schiffer Today, 8:04 PM

Return Air Baffle for CV1800

I built a return air duct for my 5hp clearvue. Used 1/2” plywood, had it extend up into the roof trusses, made several turns and added a couple of baffles
John K Jordan Today, 8:03 PM

Polyaspartic Garage Floor Coating?

I just bought a house and I would like to have the garage floor coated before I move in. Hello Garage is coming over tomorrow to give me an estimate for
Pat Germain Today, 8:02 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Bert Kemp

Recent Polls

Recent Forum Posts

Recent Blog Posts