I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: John Kananis Yesterday, 3:13 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Brian Elfert Yesterday, 4:24 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: Frank Pratt Today, 10:29 AMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Jerry Bruette Today, 11:49 AMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 11:03 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
I agree with Brian. Get a long enough chisel and you can get that nut off, it's not too far in the cartridge.
Can you remove the spindle
That's nicely organized Tom, exactly how it should be IMHO. I pay homage to Festool Systainers and Milwaukee Packout (inherited quite a few when my father
Michael Burnside Today, 11:05 AMNarrow rails used a simpler mortise..
Have the top and bottom wide rails and 7 narrow rails..
Got about halfway along the Stile,,rotated
Hopefully Darcy Warner will check in. He often extolls the virtues of the Unipoint. Wish I could find one for a good price out here in the northwest.
Orlyn Gaddis Today, 10:57 AMHad a profile to bandsaw..
So...
We have a foot for the case to stand on.
Cleared off the top of the bench
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Maurice Mcmurry Today, 9:38 AM