• Sections

  • Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Dave Anderson NH

    Time for some levity

    Thread Starter: Dave Anderson NH

    With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

    Last Post By: Dave Anderson NH Yesterday, 3:45 PM Go to last post
    Rick Potter

    Forget 'Baby on board'

    Thread Starter: Rick Potter

    I need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...

    Last Post By: Patty Hann Today, 11:53 AM Go to last post
    James White

    Shaker Window Sash Profile

    Thread Starter: James White

    Hellos All, I need some help with some window sashes. I am tasked to build some window sashes for an interior partition wall between a pantry and kitchen for a client. I mistakenly offered a shaker profile. However it turns out the cutter set I was planing on using only goes to a max thickness...

    Last Post By: William Hodge Yesterday, 12:59 PM Go to last post
    Brian Elfert

    Are they building standalone car washes like crazy in your area too?

    Thread Starter: Brian Elfert

    They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...

    Last Post By: Tom M King Today, 9:49 AM Go to last post
    John Kananis

    Spindle gouge bevel angle?

    Thread Starter: John Kananis

    I have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...

    Last Post By: Edward Weber Today, 10:39 AM Go to last post
    Ron Citerone

    Hot water sulfur smell solutions

    Thread Starter: Ron Citerone

    My cottage is on well water. Several years ago we started with the dreaded sulfur smell, hot water only. I had a plumber replace the anode. Smell came back eventually. I found the model of the anode he installed and see that is just aluminum. Seems like the one I need is aluminum/zinc? Has...

    Last Post By: Bruce Wrenn Yesterday, 8:29 PM Go to last post

  • David Falkner

    There is no available content written by David Falkner