I need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...
Last Post By: Rick Potter Yesterday, 2:44 PMHellos All, I need some help with some window sashes. I am tasked to build some window sashes for an interior partition wall between a pantry and kitchen for a client. I mistakenly offered a shaker profile. However it turns out the cutter set I was planing on using only goes to a max thickness...
Last Post By: William Hodge Yesterday, 12:59 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Tom M King Today, 9:49 AMI have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: Edward Weber Today, 10:39 AMMy cottage is on well water. Several years ago we started with the dreaded sulfur smell, hot water only. I had a plumber replace the anode. Smell came back eventually. I found the model of the anode he installed and see that is just aluminum. Seems like the one I need is aluminum/zinc? Has...
Last Post By: Bruce Wrenn Yesterday, 8:29 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
I have one of these sticks, got it with a used scroll saw. I have not used it with a bandsaw but I have tried it with my scroll saw. It does actually
Dave VanDewerker Today, 10:41 AMNo one is trying to take anything away from you or disregard your approach. The one point you seem to miss ia that EVERYONE learns differently. Sharing
Edward Weber Today, 10:39 AMYes indeed, and now I'm regretting now using Titebond for this tabletop. I've made tops with salvaged ipe with Titebond I and they held perfectly.
Mark Gibney Today, 10:37 AMKen, I built a table using this very system, some years back. I did not use any material other than wood. Works fine.
How often will the table be
From an engineering standpoint, I can't help but feel you're adding extra complexity, and thus increasing the odds of failure, for very little benefit
Jimmy Harris Today, 10:31 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 3:45 PM