In my small shop most things are kept in drawers and anything like packaging is turfed out rather than claiming space. Tools like drills share bits etc with other drills and are easily accessed from drawers. If my router lived in a Systainer the accessories would have to live elsewhere, at least...
Last Post By: Rich Engelhardt Today, 11:04 AMI have a Gitzo tripod that was bought in the late 1970s. The rubber ring for tightening the nut on the telescoping section to raise and lower the camera has finally stretched to the point of uselessness. Years ago when talking to a rep. at Gitzo I was told the part is unavailable and my model...
Last Post By: stephen thomas Today, 11:30 AMDue to health reasons, I can no longer use my shop, I'll be selling everything starting with my Lathe tools and the Powermatic 3520B: Woodcutter coring tool W/laser. $350 Sorby texturing tools - the complete set W/ micro set. $250 Sorby captive ring tool set (3 pc.) $60 Elbow hollowing tool W/...
Last Post By: tom lucas Today, 7:14 AMI've got a 23 HP diesel Kioti tractor, 3 years old. As I was operating the backhoe at about 1/2 throttle, the engine suddenly over revved, smoked for less than 10 seconds and then died. I checked all fluids, temps, etc looked over the engine for any obvious problem and all was fine. To my...
Last Post By: Edward Weber Today, 9:59 AMI got hold of the Mothers' first album Freakout when I was about 15, don't know why, maybe I liked the cover art. I liked the cynicism of the lyrics and the sendup of doowop but I didn't really understand how unique the work was and it has taken a long time to appreciate Frank's compositional style...
Last Post By: Jay Bryant Yesterday, 11:16 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Very nice as usual, thanks for showing us all your creations
Edward Weber Today, 12:33 PMWe don't know exactly what the end goal is, but I made a little sled for my tile saw out of Corian scraps for cutting multiple pieces exactly the same.
Tom M King Today, 12:10 PMI think this article is 10 years old. I love cherry but good cherry is expensive nowadays.
Mark Rainey Today, 11:56 AMI do not think that is a switch. Turn on the saw and unplug it while running. wait 10 seconds and plug it back in. See if it starts up or not. Probably
Bill Dufour Today, 11:49 AM
Lumber supply
Thread Starter: steven c newmanHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 9:45 AM