I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: John Kananis Yesterday, 3:13 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Brian Elfert Yesterday, 4:24 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: George Yetka Today, 9:04 AMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Brian Holcombe Today, 9:39 AMOpinions, please on integrated arbor and chuck for a DP. Am looking at the LLAMBRICH Keyless chucks ... integrated 2MT shank/arbor 1/32" to 3/8" (part# JK10-MT2) 1/32" to 1/2" (JK13-MT2) Thanks
Last Post By: Bill Dufour Today, 12:23 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
The only fix I've ever done that works long term is to pull them apart, clean up the mortises and tenons and re-glue, adding back material with a thin
roger wiegand Today, 10:24 AMThe amount of time lost to digging around for tools and things in a day adds up . Even if you are not the contractor, being an efficient employee makes
Ray Selinger Today, 10:22 AMIt will turn silver. Washing and oiling will delay the decay and possibly splitting.
On outdoor furniture you can also epoxy any end grain
I've used Penefin outdoor oil and Cabot's Australian Timber Oil for WO on outside projects. The natural color never lasts long. It goes to gray/black
Stan Calow Today, 10:14 AMThis is what I use: https://www.leevalley.com/en-us/shop...wio0TaedqTvPp0
Stan Calow Today, 10:09 AM
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Maurice Mcmurry Today, 9:38 AM