I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Sam Force Today, 9:43 AMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Jim Becker Yesterday, 8:10 PMI glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Yesterday, 6:33 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: julian abram Yesterday, 8:32 PMI was talking with friend over the weekend and they were unaware that V12 has been released. So, I figured I would post here in case someone wasn't aware of this news. In general the upgrades look good overall. I personally upgraded my version of Vcarve Pro.
Last Post By: Grant Wilkinson Yesterday, 12:08 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
You might want to look into a Dispos-a-Blade system if you get the Dewalt. I installed it on my 12" jointer and it leaves a glass smooth finish.
Rob Sack Today, 11:54 AMThe clamps appear to be missing the pads. Will you make some new ones?
scott lipscomb Today, 11:54 AMI recently picked up one of the older Central Machinery 12" disc sanders from an estates sale for cheap. It has a weird, intense vibration for about
Bert McMahan Today, 11:54 AMI think Travis wants to use standard ¼ shelf pins and a dumb plywood shelf. Which would be adjustable, of course. Then Travis would add bottom mount
Thomas McCurnin Today, 11:50 AMThis may surprise you then. Gothenburg, 17 June 2020: SKF is making further investments in strengthening its manufacturing footprint in China for ball
Richard Coers Today, 11:32 AM
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Michael Burnside Today, 11:31 AM