Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Time for some levity
Thread Starter: Dave Anderson NH
With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 3:45 PM

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Alan Lightstone Yesterday, 8:16 AM

Forget 'Baby on board'
Thread Starter: Rick Potter
I need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...
Last Post By: Rick Potter Yesterday, 2:44 PM

Shaker Window Sash Profile
Thread Starter: James White
Hellos All, I need some help with some window sashes. I am tasked to build some window sashes for an interior partition wall between a pantry and kitchen for a client. I mistakenly offered a shaker profile. However it turns out the cutter set I was planing on using only goes to a max thickness...
Last Post By: William Hodge Yesterday, 12:59 PM

Are they building standalone car washes like crazy in your area too?
Thread Starter: Brian Elfert
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Tom M King Yesterday, 10:26 AM

Hot water sulfur smell solutions
Thread Starter: Ron Citerone
My cottage is on well water. Several years ago we started with the dreaded sulfur smell, hot water only. I had a plumber replace the anode. Smell came back eventually. I found the model of the anode he installed and see that is just aluminum. Seems like the one I need is aluminum/zinc? Has...
Last Post By: Bruce Wrenn Yesterday, 8:29 PM

Bob Venable

There is no available content written by Bob Venable

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

Looking for User Manual or Electric Motor for Lin Mac Mortiser

It might be since that looks like 1940 technology they copied. But in my experience, first generation Taiwanese machinery was not know as high quality.
Richard Coers Yesterday, 11:41 PM

aluminum or steel?

There is absolutely no need for wear strips. With gear slides, the wear surfaces are on the inside of the slides. There are no rack and pinion slides
Richard Coers Yesterday, 11:32 PM

Joint strength test

After looking at it again the joint isn't going to gain much added strength even with the domino's glued. I will presume the board is 3/4" thick
Ronald Blue Yesterday, 11:32 PM

Wiring Old poitras TS-121 12-14" table saw

I can not read the data plate very well. I see no horsepower rating or KW either.
3hp would be 20 MFD. 5hp would be around 40 MFd. these are for
Bill Dufour Yesterday, 11:30 PM

8 1/4" vs. 10" Worm Drive Portable Table Saw?

The Jessems do more than just push vertical. They are angled and push the stock against the fence and do not turn backwards for anti kickback. They
Darrell Bade Yesterday, 11:26 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Bob Venable

Recent Polls

Recent Forum Posts

Recent Blog Posts