All these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: John Kananis Today, 10:24 AMI have two exterior doors, one to the back of my house and one to my tool shed. Both are showing the effects of winter water splashing up on them at the base. The door to my shed is really bad. I don't want to replace the doors but would like to put a board over the base, like a kickplate to...
Last Post By: Stan Calow Today, 9:20 AMMy cottage is on well water. Several years ago we started with the dreaded sulfur smell, hot water only. I had a plumber replace the anode. Smell came back eventually. I found the model of the anode he installed and see that is just aluminum. Seems like the one I need is aluminum/zinc? Has...
Last Post By: Bill Howatt Today, 9:43 AMI was talking with friend over the weekend and they were unaware that V12 has been released. So, I figured I would post here in case someone wasn't aware of this news. In general the upgrades look good overall. I personally upgraded my version of Vcarve Pro.
Last Post By: Grant Wilkinson Today, 12:08 PMI glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Today, 2:46 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
My suggestion is to get the 735 and use infinity Hss not the oem stuff. I have a pm 15hh but used to have a 735 with infinity carbide tipped blades. The
Andrew Hughes Today, 3:23 PMI have a 20' Powermatic planer and a Dewalt 735. I use the Dewalt as a finish planer, and the Powermatic as a roughing planer. The high speed steel knives
William Hodge Today, 3:15 PMHey Stuart, here's a quick update - the gap has closed by up by it's own accord in the two weeks since this happened.
To answer your question,
I recognize that my reply is to a pretty old post. Nevertheless, I have a current source for madrona burl in the Portland area. Please message me for
Ethan Green Today, 2:35 PMOh, I didn't mean to imply anything disparaging about putting a $400 high quality chuck on a DP that originally cost similar money two decades ago. It's
Jim Becker Today, 2:27 PM
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Today, 12:14 PM