Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Time for some levity
Thread Starter: Dave Anderson NH
With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Today, 4:42 PM

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Mike King Today, 11:15 AM

Cheap Bandsaw for Resawing
Thread Starter: Jimmy Harris
I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Tom Trees Yesterday, 8:51 PM

Shaker Window Sash Profile
Thread Starter: James White
Hellos All, I need some help with some window sashes. I am tasked to build some window sashes for an interior partition wall between a pantry and kitchen for a client. I mistakenly offered a shaker profile. However it turns out the cutter set I was planing on using only goes to a max thickness...
Last Post By: Tom M King Today, 1:23 PM

Are they building standalone car washes like crazy in your area too?
Thread Starter: Brian Elfert
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Tom M King Today, 5:33 PM

Hoffman and Hammer workbenches.....anyone have one???
Thread Starter: Travis Chapin
I'm looking for a nice workbench to get me back into woodworking. I do not have any power tools at this time other than a few handheld tools. I'm not sure making a nice bench is an option. Mostly I just want a place to plane and build stuff by hand to work on my skills until I can afford a full...
Last Post By: steven c newman Yesterday, 7:47 PM

Jordan Epstein

There is no available content written by Jordan Epstein

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

Are they building standalone car washes like crazy in your area too?

Nearest car wash 15 minutes away one way. 10 minutes here and it’s done. Push button on pressure washer for quick blast off. Foam gun. Long handled
Tom M King Today, 5:33 PM

Solved a repair problem

Very nicely done with excellent step by step details. Thank you.
Ralph Okonieski Today, 5:31 PM

Transporting air dried claro walnut - in the desert mid-summer

I air dried 12/4 in PA and it was down to 10% within 2.5 years. Possibly 2 years. After the first 6 months of drying lumber, you kinda forget about it
Patrick Kane Today, 5:05 PM

Woodturning lathe for young adult nephews?

Thanks for the suggestion. Unfortunately the nephew's location is some distance from a Woodcraft or Rockler store. The upside is that free shipping
Steve Mathews Today, 5:04 PM

Bugs !

I'd be afraid to try heating the entire table, too. Titebond yellow glues lose most of their strength at 150F. Franklin doesn't say how much is lost
John TenEyck Today, 4:47 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Jordan Epstein

Recent Polls

Recent Forum Posts

Recent Blog Posts