Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Michael Burnside Today, 11:31 AM

Cheap Bandsaw for Resawing
Thread Starter: Jimmy Harris
I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Sam Force Today, 9:43 AM

Are they building standalone car washes like crazy in your area too?
Thread Starter: Brian Elfert
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Jim Becker Yesterday, 8:10 PM

Epoxy glue joint opened
Thread Starter: Mark Gibney
I glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Yesterday, 6:33 PM

landscaping is my other hobby, record for me, 25 yards of mulch
Thread Starter: Brian Runau
My landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: julian abram Yesterday, 8:32 PM

Rocks in their heads
Thread Starter: Edward Weber
https://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area What the ____ is wrong with some people?
Last Post By: Doug Garson Today, 12:13 AM

James E Baker

There is no available content written by James E Baker

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

lap tops in coffee shops

yeah 12,000 cars stolen in toronto in one year and just one of all going on. Have to ask my friend how he was hacked maybe he was not in a coffee shop
Warren Lake Today, 12:26 PM

Harbor Freight 12" disc sander vibrates (only) during startup

I have a Powermatic DS20 that is similar to what you describe also on start up only. I think it is a current inrush that causes it. With mine it is closer
Robert Hayward Today, 12:25 PM

Hollow Mortise Chisels 1/4 and 5/16 from Lee Valley Unused + Cone Sharpeners

Hollow Mortise Chisels 1/4" and 5/16", plus large cone sharpeners - purchased from Lee Valley about a year ago, but they never came out of
Andy Jungblut Today, 12:09 PM

lap tops in coffee shops

The public wifi concerns are wildly overblown. You are fine to use a Starbucks wifi with your laptop.

https://wapo.st/3UKVc4e

Keegan Shields Today, 12:08 PM

Bowl gouge measuring

I have several bowl gouges, from several manufacturers. I know folks measure flutes differently, how do you know when ordering a new gouge how it’s measured.
mike johnston Today, 12:06 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

James E Baker

Recent Polls

Recent Forum Posts

Recent Blog Posts