• Sections

  • Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Dave Anderson NH

    Time for some levity

    Thread Starter: Dave Anderson NH

    With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

    Last Post By: Patty Hann Today, 9:14 AM Go to last post
    Jimmy Harris

    Cheap Bandsaw for Resawing

    Thread Starter: Jimmy Harris

    I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...

    Last Post By: Tom Trees Yesterday, 10:22 PM Go to last post
    Rick Potter

    Forget 'Baby on board'

    Thread Starter: Rick Potter

    I need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...

    Last Post By: Rick Potter Today, 5:09 AM Go to last post
    Brian Elfert

    Are they building standalone car washes like crazy in your area too?

    Thread Starter: Brian Elfert

    They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...

    Last Post By: Warren Lake Today, 9:08 AM Go to last post
    John Kananis

    Spindle gouge bevel angle?

    Thread Starter: John Kananis

    I have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...

    Last Post By: John Kananis Today, 2:16 PM Go to last post
    John Kananis

    Harvey Slider on Unisaw?

    Thread Starter: John Kananis

    All these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!

    Last Post By: Troy Gamm Today, 2:51 PM Go to last post

  • Karl Andersson

    There is no available content written by Karl Andersson