I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Zachary Hoyt Today, 1:10 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Jim Becker Yesterday, 8:10 PMI glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Yesterday, 6:33 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: julian abram Yesterday, 8:32 PMhttps://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area What the ____ is wrong with some people?
Last Post By: Doug Garson Today, 12:13 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
If the slots go clear to the rim then a hook wrench might work. If you have the correct size the solid type shown are better then the hinged ones.
Bill Dufour Today, 1:11 PMI'm glad you found a good deal. It sounds like you've got a lot of work to do up front, but I'm sure it will pay off. I had looked at that model of
Zachary Hoyt Today, 1:10 PMFor sale is a used Fuji Mini Mite 3 in good condition. Fresh filters. This sale is for the turbine only. I got a great deal on a Mini Mite 4, so I upgraded.
Brian Cosgrove Today, 1:06 PMI bought my house in a tax auction for $21k, and at the time it was assessed at 66k. I didn't do anything about that because I knew that once I did the
Zachary Hoyt Today, 1:05 PMI think I will too.
It's gonna take a while to get it set up. It's filthy. So I've got to do a deep cleaning. And there's some repairs
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Michael Burnside Today, 11:31 AM