Has been restocked..
Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox...
Eight 1 x 6 x 6'
Five 1 x 4 x 6'
And he threw in a stack of shorts
And a 3/4" x 8" x 39" slab..
In my small shop most things are kept in drawers and anything like packaging is turfed out rather than claiming space. Tools like drills share bits etc with other drills and are easily accessed from drawers. If my router lived in a Systainer the accessories would have to live elsewhere, at least...
Due to health reasons, I can no longer use my shop, I'll be selling everything starting with my Lathe tools and the Powermatic 3520B:
Woodcutter coring tool W/laser. $350
Sorby texturing tools - the complete set W/ micro set. $250
Sorby captive ring tool set (3 pc.) $60
Elbow hollowing tool W/...
I have a Gitzo tripod that was bought in the late 1970s. The rubber ring for tightening the nut on the telescoping section to raise and lower the camera has finally stretched to the point of uselessness. Years ago when talking to a rep. at Gitzo I was told the part is unavailable and my model...
I've got a 23 HP diesel Kioti tractor, 3 years old. As I was operating the backhoe at about 1/2 throttle, the engine suddenly over revved, smoked for less than 10 seconds and then died. I checked all fluids, temps, etc looked over the engine for any obvious problem and all was fine. To my...
Hello, I have been making some Charcuterie Boards. Now I am thinking of adding some handles. I M not sure what to search for. I am looking for something in black. I have also seen handles shaped like a branch that I liked. If anyone has suggestions with a source, I would appreciate it.
...
Sending the board through the planer in the proper direction is far more important that feed speed. Feed speed is just about cuts per inch for a smoother
Sections
Recent Articles
Recent Article Comments Widget
Recent Polls
Recent Blog Posts
Lumber supply
Thread Starter: steven c newmanHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 9:45 AM