Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Time for some levity
Thread Starter: Dave Anderson NH
With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 3:42 PM

Help Me Pick a Plow Plane or Is It a Plough Plane
Thread Starter: Thomas McCurnin
Typical use will be on 3/4 to 7/8" stock planing on edge for a a 1/4" groove about 3/8" deep for frame and panel construction. I'll also be using it for grooving a post, usually about 1.5" x 1.5" is typical, again to accept a panel for frame and panel construction. It needs to go both directions,...
Last Post By: Derek Cohen Today, 7:45 PM

How to replace Syder/Coupler on Supermax 16/32>?
Thread Starter: Thomas Colson
I have a Supermax 16/32 with a pretty clapped out rubber spyder-coupler. Little tiny pieces of rubber are coming out of it, which makes sense, I've used this like I stole it for the last 2 years. Any videos or instructions with pictures anywhere on how to do this that are deliberately hidden and...
Last Post By: Jerry Bruette Today, 4:13 PM

I hate rusty saws, but...
Thread Starter: Richard Hutchings
I just saw an ad for 7 rusty saws for $25 and I may not be able to resist. One has the thumbhole but broken horn. It might be worth buying the whole lot but I'll have to get better at cleaning them up. I hate the mess. Hopefully someone will buy them before I decide to bite the bullet.
Last Post By: Maurice Mcmurry Today, 9:51 AM

Solid Walnut bookshelf dados - is glue enough?
Thread Starter: Bill Brammer
Building 6 ft high, 28 in wide, 12 inch deep solid 3/4 inch walnut bookshelf , no adjustable shelves. I have dados for all shelves. The sides are a little bowed, requiring some pressure with clamps to pull them together with the dados. Not a ton, but some. I'm trying to decide if I need to add...
Last Post By: Jim Becker Today, 10:58 AM

Painters damaged original wood windows - ideas for a fix
Thread Starter: Tim Vanderet
Hi All, I've spent a lot of time reading and learning in these forums, so thank you to everyone who makes this a valuable resource. We are having some work done on our home in the SF Bay Area of California and our painters got overzealous with scraping the old paint off of the windows and...
Last Post By: Tom Bender Today, 7:35 AM

Jackie Outten

There is no available content written by Jackie Outten

Recent Polls
Recent Forum Posts

Options for Harvey Table Saw?

I've been away from woodworking for about ten years while I was restoring a car. It was something wanted to do since I was a kid and I finally got it
Pat Germain Today, 8:44 PM

1 1/4" bore shaper tooling

Message sent
Kyle Stiefel Today, 8:30 PM

Camaster Cobra X3 Problems

I did and have always had great response from them before.

Zelma
James & Zelma Litzmann Today, 8:28 PM

The automatic woodturning chuck

That Easy Chuck looks like it is a hybrid between the Vicmarc VM150 chuck and the (discontinued) Nova Infinity Quick Change jaw system. The VM150 provides
Neil Strong Today, 8:25 PM

VFD for 7.5 hp 3 phase to run on 220 single phase

Mike Schuch
I followed your suggestion, bought a 10 hp 7.5 kw vfd for the 7.5 hp main motor, and a smaller one for the 1.2 hp scoring. - Vevor VFD's
Mike Leiferman Today, 8:21 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Jackie Outten

Recent Polls

Recent Forum Posts

Recent Blog Posts