Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Jim Becker Today, 9:42 AMI'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: John Kananis Today, 5:56 PMI need to downsize my hobby woodworking shop a bit, and would like to have a table saw that is smaller than a cabinet saw with the extension table. Is there a smaller table saw that would still be as accurate as a cabinet saw? Most of the smaller saws are jobsite saws, and they don't seem to have a...
Last Post By: Matt Day Yesterday, 10:28 PMThis morning I plugged in a small electric heater for the bathroom. No sign of life, figured it was either the heater or outlet. I turned off the circuit breaker (after I found it, panel is poorly labeled), removed the outlet and began poking around with a meter. Black to white was 0 volts, I was...
Last Post By: Jim Koepke Today, 8:37 PMA friend recently asked me to make her a cremation ashes box (for herself). I did some research and the recommendation is one cubic inch per pound of body weight. All fine. But then she suggested that we make it as something she can use while alive. I thought of a jewelry box but I know...
Last Post By: Mike Henderson Today, 7:59 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
These are my favorite pliers for making a hook to go around a screw or post.
The smaller pair was given to me by my dad. He
Before you return it - it's a great saw - I've had the same saw for years, and I'm almost certain that mine are Y'd into the vacuum hose. I remember the
Don Peters Today, 8:35 PMBoggs Flat and Round Spokeshaves price reduce to $299 shipped to lower 48
Check or PayPal (check must clear before shipping)
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 9:30 AM