I'm looking at getting a pair of bucket hooks: https://www.bxpanded.com/BX-bucket-hooks I like the fact they can be removed when not needed. I will use it mostly for lifting logs and pulling them out of the woods as well as sometimes lifting heavy items. Most of the time I'll use a chain which...
Last Post By: Edward Weber Yesterday, 3:16 PMI am converting my downdraft sanding table to a duel purpose downdraft/paint booth. Basically I have a 3'x5' downdraft bench on wheels with an old furnace blower to draw the sanding dust thru the table and out thru furnace filters. With my sander hooked to my Festool dust extractor, it does a...
Last Post By: Leigh Betsch Yesterday, 8:04 PMI finally bit the bullet & ordered a SawStop PCS 1.75HP with the 36" T-Glide-Fence the other day from my local Woodcraft store just before the May 3rd. price increase. I really wanted to get the 3HP. model, but I only have one 30-amp 240V circuit available & my dust collector is currently run...
Last Post By: Jim Dwight Yesterday, 9:39 AMTypical use will be on 3/4 to 7/8" stock planing on edge for a a 1/4" groove about 3/8" deep for frame and panel construction. I'll also be using it for grooving a post, usually about 1.5" x 1.5" is typical, again to accept a panel for frame and panel construction. It needs to go both directions,...
Last Post By: Derek Cohen Today, 1:55 AMHad those planks of Ash....four at 7/8" x 5-1/2" x 77" and one at 7/8" x 5-1/2" x 48"......and figured I could try to build a Shaker Style Table, complete with a drawer....I remember way back when, during the New Yankee Workshop days, that Norm built such a table. Have to go strictly by memory,...
Last Post By: John Kananis Today, 12:52 AMThose giant teeth and that thin aluminum skin, not the right tool for the job.
Ole Anderson Today, 8:44 AMJust curious here but if I read your description you are not using a crosscut sled for plywood panels? All crosscuts are the tso & track?
Jared Sankovich Today, 8:43 AMOne of our framing guys has that saw, he bought from Acme. Significantly less power than the Dewalt worm drives that we've pretty much all switched to,
Steve Rozmiarek Today, 8:38 AMThat's one of the reasons I replaced the rails and fence with the Incra system. I know this is an expensive alternative but I really love the accuracy
Johnny Barr Today, 8:37 AMJonathan,
You just described my methodology 15 years ago. Oddly, I just bought a slider a few months ago. What happened in between? A CNC. For
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: William Lessenberry Yesterday, 11:34 PM