Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Yesterday, 6:54 PMWe’re gluing old chairs that have come a little loose. Any tips on how to get Titebond in a small crack? Will thinning make it useless? Thank you.
Last Post By: Charles Edward Today, 7:21 AMI have a baldor 7.5HP BALDOR 3450RPM 213T TEFC 1PH MOTOR L3709Ton my table saw. What type of grease should I look for to put grease in the grease or zirk fitting?
Last Post By: John C Cox Yesterday, 4:38 PMLooking for ideas to attach a table top to the base on an outdoor dining table. Thought to use stainless steel figure 8's, but I can only find ones that are @ 7/17" overall length which is way to small. Normal steel units are 1.3" long. Table has a 5' wide frame with a 35" marble insert and a 3"...
Last Post By: STUART Robertson Yesterday, 3:02 PMI've got a cabinet shop, been in the business for almost 10 years and suddenly I've got 2 potential jobs that want beaded face frames. One has 94 doors and drawer fronts. So I bought (luckily found one) a new, discontinued, Kreg PRS1200 system. It comes with router bits for the bead. I'd like...
Last Post By: STUART Robertson Yesterday, 8:27 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Agreed. For my practical purposes there's not much difference. For highly stressed joints newer stock may be advisable. https://www.epoxyworks.com/index.php...ife-real-life/
Kevin Jenness Today, 8:40 AMOne question: What is neat epoxy resin hardener? I just don't understand what that means.
edited to add: As a correction to my earlier
My experience as well, Andy. I haven't found an end to epoxy shelf life yet.
I'll ad another note about a cleaner. I had a boat business
I will point out that West System generally recommends wetting out surfaces with unmodified mixed resin for best adhesion prior to adding thickeners to
Kevin Jenness Today, 8:32 AMThis. Good post. But say "indefinite shelf life".
I have been using WEST epoxy, for wood glue, virtually exclusively for nearly
Rocks in their heads
Thread Starter: Edward Weberhttps://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area What the ____ is wrong with some people?
Last Post By: Doug Garson Yesterday, 4:45 PM