Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Alan Lightstone Today, 9:49 AM

Lumber supply
Thread Starter: steven c newman
Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 10:35 AM

For Clarity, Sometimes the Oxford Comma is Necessary
Thread Starter: Jim Koepke
One member includes a list of favorite things, one of which is the Oxford Comma. In my early years of education, teachers taught us to use a comma before and in a list of items. In later years, this seemed to drop out of favor. Could it have been the difference due to some teachers having moved...
Last Post By: Alan Rutherford Today, 7:39 AM

Seeking Recommendation on a Bench Grinder with Specific Features.
Thread Starter: Scott Memmer
Hi, Everyone. I dearly love this forum, although I have not posted in a long time. You folks are so knowledgeable and always have such great suggestions. Here is my situation. I make a small music accessory and need to build my own saw. Without going into all the details, I've been searching for...
Last Post By: Ray Selinger Today, 5:12 PM

Residential fence rules
Thread Starter: Stan Calow
I am looking for what people in other jurisdictions have dealt with. I have always understood that, in my city, fences between homes were the responsibility of the homeowner who first puts it up. And the rule was "good side out" and 6" off the property line. But after a discussion with a...
Last Post By: Bill Dufour Today, 3:51 PM

Harvey COMPASS RG-1/RG-2 Universal Roller Guides Question
Thread Starter: James Cheever
All - Has anyone seen or used the Harvey COMPASS RG-1/RG-2 Universal roller guides. They look solid and would be a pretty useful addition to my shop, but the price seems way too high. I'd love to hear any feedback. Thanks.
Last Post By: eugene thomas Today, 3:07 PM

Rich Lightfoot

There is no available content written by Rich Lightfoot

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

Stanley 45 missing sliding section - Are all sliding sections interchangeable?

If you want...contact Eric at nhplanparts and see what he has..
steven c newman Today, 7:56 PM

Zappa

The thing I like best about Zappa was him booting Lowell George. Can’t conceive of a world without Little Feat, the bright lights of Memphis, and the
Kent A Bathurst Today, 7:34 PM

Curial Chair help

Thanks Jamie.

I don't do much bending of plywood -- so forgive my naïveté, but why couldn't I use wiggle wood to make the corners?
Ollie McDottie Today, 7:34 PM

sawing a log and reassembling it WITHOUT warping?

Hollowing out the log to make a tube with somewhat uniform wall thickness and open top & bottom should work OK. The top & bottom could have separate
Cameron Wood Today, 7:20 PM

Project: Simple Cutting Board for Gift

I like it. The problem with cutting boards is that they are too nice to cut on.
Leigh Betsch Today, 7:18 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Rich Lightfoot

Recent Polls

Recent Forum Posts

Recent Blog Posts