Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Today, 9:45 AMAbout a year ago I was reading and found that Vietnam veterans qualified for VA medical benefits. About the same time, I was talking with a neighbor who came over to ask me about hearing aids. I have bimodal hearing; I have a cochlear implant (CI) on one ear and a hearing aid (Ha)on the other ear...
Last Post By: Mike Henderson Yesterday, 11:09 AMIn my small shop most things are kept in drawers and anything like packaging is turfed out rather than claiming space. Tools like drills share bits etc with other drills and are easily accessed from drawers. If my router lived in a Systainer the accessories would have to live elsewhere, at least...
Last Post By: glenn bradley Today, 9:45 AMDue to health reasons, I can no longer use my shop, I'll be selling everything starting with my Lathe tools and the Powermatic 3520B: Woodcutter coring tool W/laser. $350 Sorby texturing tools - the complete set W/ micro set. $250 Sorby captive ring tool set (3 pc.) $60 Elbow hollowing tool W/...
Last Post By: tom lucas Today, 7:14 AMI have a Gitzo tripod that was bought in the late 1970s. The rubber ring for tightening the nut on the telescoping section to raise and lower the camera has finally stretched to the point of uselessness. Years ago when talking to a rep. at Gitzo I was told the part is unavailable and my model...
Last Post By: George Yetka Today, 9:18 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Nice looking tataki nomi. Who is the maker? Pic of the stamp?!
Justin Kwong Today, 10:42 AMThat on some cars/vans/trucks with a key fob, if you hold down the unlock button for about 15 seconds, the two front windows go down?
I was
Cherry is one of my favorite woods. Since I mostly make guitars, I favor perfectly quartersawn stuff with visible rays that the cabinet guys don't usually
John C Cox Today, 10:28 AMTiny hard to adjust guides; flimsy tension and tracking mechanism; sleeve bearings; hard pass.
Hard to see but my 28-100 (the
I have four rules for shop infrastructure
1- no coats on shop furniture
2- it must be durable, so 13 ply BB for me
3- if it has
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 12:22 PM