Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

How to bend wood like this - Outdoor furniture project

Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...

Cheap Bandsaw for Resawing

I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...

Is there a small, accurate table saw?

I need to downsize my hobby woodworking shop a bit, and would like to have a table saw that is smaller than a cabinet saw with the extension table. Is there a smaller table saw that would still be as accurate as a cabinet saw? Most of the smaller saws are jobsite saws, and they don't seem to have a...

AC electrical puzzlement

This morning I plugged in a small electric heater for the bathroom. No sign of life, figured it was either the heater or outlet. I turned off the circuit breaker (after I found it, panel is poorly labeled), removed the outlet and began poking around with a meter. Black to white was 0 volts, I was...

We are losing our nearest Woodcraft

In January I was in Spokane to see my HA audiologist and stopped in at Woodcraft. I bought several of my larger tools there including my Jet drillpress, both my Jet air filters and my PM3520B which the owners delivered, even helping me get it into the shop. Nick told me he had experienced some...

Box for Cremation Ashes

Mike,
See if you have a crematorium in your area and go there. You can probably acquire a box to keep for reference. The one I went to didn't charge

This can't be unseen - once you see it.

I see them, no idea who it is.

jtk

This can't be unseen - once you see it.

That is where the > Go Advanced < button next to the > Post Quick Reply < button helps.

jtk

In-floor hardware - any ideas?

I'm working with a church remodel. They want to have tall, slim candle stands - probably 5' tall, around 3" in diameter.

They'd like

Bosch Reaxx table saw - why you cant buy it

Altendorf and Felder have active saw safety systems that are available worldwide, they don’t damage the blade and have no consumable parts.

SC Pig-Picking