Hey everyone I have a nice router table, but I've been thinking of upgrading to a shaper. I'm thinking 5hp would be ideal, but I'm not sure what other features exactly I should be looking for. There are 3 that seem like a good fit and I'm hoping to get some feedback based on their specs and/or...
Last Post By: Patrick Kane Yesterday, 10:37 AMMy son Miles is in Normandy until August working on a crew fabricating trusses and other elements for the nave and choir of the cathedral. He is one of a half dozen American timber framers working on the project, which is being undertaken by two French companies https://www.remy-desmonts.com/ and...
Last Post By: Mel Fulks Yesterday, 10:04 PMI just read that Virginia requires safe storage. I have my dads 22ga rifle that he had when he was a kid. I don’t know exactly when he got it but it’s pretty old. He was born in 1908. the gun breaks down into two pieces and is stored in some sort of long sock that’s supposed to prevent rust....
Last Post By: Tom M King Yesterday, 9:48 PMI've talked about this several times and I'm finally back to building #2! When I built my first guitar I didn't have the CNC, actually built the CNC while I was finishing that guitar so the only job I did on the CNC for that guitar was a little bit of the bridge. I began build #2 while I was...
Last Post By: David Falkner Yesterday, 7:30 PMI had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...
Last Post By: Bill Dufour Yesterday, 9:55 PMSoda Pop (Votes: 1)
Soda (Votes: 19)
Pop (Votes: 19)
Coke (Votes: 5)
Cola (Votes: 0)
Soft Drink (Votes: 7)
Cold Drink (Votes: 1)
Tonic (Votes: 0)
None of the above (Votes: 6)
Bump for the weekend
Sam E Miller Yesterday, 11:22 PMHi, hang onto it and have it bored to fit your new saw.
I had an FS Tools st bored for my slider for $50
Regards, Rod
That's tempting. Can your machine do 4 or 4 1/2 TPI?
A frame saw would be nice to add to the shop.
Let me know when you are in Pittsburgh,
Interesting discussion. I've bought Honduran Mahogany in the last several years from this place:https://greenerlumber.com Sinker logs to be precise.
Stan Calow Yesterday, 10:58 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 6:01 PM