All these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: John Kananis Today, 10:40 AMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Tom Yaegle Today, 6:11 PMI have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: Don Frank Today, 8:57 AMhttps://www.cnn.com/2024/05/07/business/swiss-army-knife-blade-scli-intl/index.html While I understand the decision, I can't help think that, I carry a pocket knife, with a blade only and use it for so many tasks. I think I would be fumbling through the selection of tools trying to find a...
Last Post By: Edward Weber Today, 7:25 PMAll, I have been in the market for a bigger bandsaw. Starting to build some rocking chairs a la Hal Taylor, and my PM 141 does not have enough clearance to make a few of the cuts needed. A Powermatic 80 20" had come up in my area, for a little under $1k. Owner states it runs smooth, cuts well....
Last Post By: Mickey Plunkett Today, 11:47 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
I can't argue with that.
I've been carrying a pocket knife of one sort or another throughout the past 45 years and I've managed to NOT stab anyone
Hi Stephen and welcome to the Creek.
Some of my projects have been documented during the process of building them and then posted in which
I would make several curved rails and attach them to the circumference with some stainless screws through the railing through a spacer and into the edge
Lee Schierer Today, 7:02 PMI got delayed doing a bench top glue up by about three weeks, now I'm wondering if I should replane everything to get a fresh edge before glue up. I did
Kenneth Moar Today, 6:57 PMWell, It is a pretty strong water proof glue. Some people (Norm Abrams included) advocate wetting the joint before applying the glue to activate the
Lee Schierer Today, 6:55 PM
Bad job coming
Thread Starter: Tom M KingI have these two raised panel garage doors to refinish on a lake rental house. Just testing a couple of panels, it won't be too bad sanding down to bare wood, but someone had put another coat of marine varnish on the bottom two sections, so those are going to get some work with a heat gun before...
Last Post By: Tom M King Today, 5:28 PM