Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

Those proud of their workshops, please post pics!

I'll finally be non-nomadic, and I'd like to finally build up a workshop. Before I get started, I'd love to get ideas. I'd love to see how you do things, and how you do things differently with all the disciplines here: tuners, neanders, power tool users, festoolies, etc. For those of you who...

How to bend wood like this - Outdoor furniture project

Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...

Cheap Bandsaw for Resawing

I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...

Pencil Sharpeners

I just ordered a dozen pencil sharpeners for 12$ from Amazon. These should last me through the small project I have on the back burner.:D

Woodpecker’s 96” layout tool. Well worth the money.

I have needed a long measuring tool that is rigid for checking square on doors (measuring the diagonals). I bought this a bit reluctantly because it is in three pieces and I don’t normally trust rulers that come apart. This is dead-on accurate and the joints where it comes together are precision...

Rikon Lathe 70-1824

Harold, I don’t think the headstock comes off. The manual is silent on this point but clearly describes an assembly process in which the headstock is

Cheap Bandsaw for Resawing

From my observations side guides are of almost no importance on a bandsaw that can adequately tension a wider blade (1" or more. Maybe 3/4",

Are they building standalone car washes like crazy in your area too?

some buy the land to park money and the land goes up and its sold seen this in TO past,. They want it to make money but more so they want the land that

Good source if you want to try Japanese planes

Whatever you want to justify is fine, I would have to do an inlay in my shop, or not buy them in the first place. If the supplier was as good as suggested,

Good source if you want to try Japanese planes

How you tell they are backed out from that angle is beyond me. You really think he backed them out after showing the curls? The only showed a tapered

SC Pig-Picking