Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

Time for some levity
Thread Starter: Dave Anderson NH
With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Patty Hann Today, 9:14 AM

Cheap Bandsaw for Resawing
Thread Starter: Jimmy Harris
I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Tom Trees Yesterday, 10:22 PM

Forget 'Baby on board'
Thread Starter: Rick Potter
I need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...
Last Post By: Rick Potter Today, 5:09 AM

Are they building standalone car washes like crazy in your area too?
Thread Starter: Brian Elfert
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Warren Lake Today, 9:08 AM

Spindle gouge bevel angle?
Thread Starter: John Kananis
I have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: Edward Weber Yesterday, 3:48 PM

Need ideas on waterproof board to cover water damaged base of outside doors
Thread Starter: Randall J Cox
I have two exterior doors, one to the back of my house and one to my tool shed. Both are showing the effects of winter water splashing up on them at the base. The door to my shed is really bad. I don't want to replace the doors but would like to put a board over the base, like a kickplate to...
Last Post By: Rich Engelhardt Today, 12:29 PM

Gary Rodgers1

There is no available content written by Gary Rodgers1

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

SCM T130 bearing change

I Googled the machine parts break down. It looks like you'll be dealing with a deep groove ball bearing on one end and a angular contact bearing on the
Jerry Bruette Today, 1:00 PM

Bosch Reaxx table saw - why you cant buy it

I will never own a Sawstop or any equipment that uses their flesh sensing system. Steve Gass as most remember tried to make his system mandatory and two
Donald Hofmann Today, 12:33 PM

landscaping is my other hobby, record for me, 25 yards of mulch

Looks great Brian. We get 10 yards of mulch about every 9-10 months. Really keeps the beds looking good.
Steve Jenkins Today, 12:32 PM

Need ideas on waterproof board to cover water damaged base of outside doors

I'd replace the slabs.

Why is it you don't want to do that?
Rich Engelhardt Today, 12:29 PM

Hedge trimmer cleaner

I use WD40 after every use, & don't bother wiping it off- just run a few seconds and put the plastic guard back on. The pump sprayer refilled from
Cameron Wood Today, 12:27 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Gary Rodgers1

Recent Polls

Recent Forum Posts

Recent Blog Posts