Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

Those proud of their workshops, please post pics!

I'll finally be non-nomadic, and I'd like to finally build up a workshop. Before I get started, I'd love to get ideas. I'd love to see how you do things, and how you do things differently with all the disciplines here: tuners, neanders, power tool users, festoolies, etc. For those of you who...

How to bend wood like this - Outdoor furniture project

Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...

Cheap Bandsaw for Resawing

I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...

Pencil Sharpeners

I just ordered a dozen pencil sharpeners for 12$ from Amazon. These should last me through the small project I have on the back burner.:D

Are they building standalone car washes like crazy in your area too?

They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...

Are they building standalone car washes like crazy in your area too?

More car washes than there used to be. It seems to me that they are being squeezed in on infill and oddly shaped lots that otherwise aren't useful for

Hot water sulfur smell solutions

Thanks for all the replies! I have googled and read a lot about this but really wanted to hear from folks like you guys who aren't selling stuff. Any

This can't be unseen - once you see it.

Ok I finally see the face flash very quickly then gone, if I squint really hard I see a man's face.
Ron

Joint strength test

End grain or side grain i double coat and dont thin. washcoat is a different beast for a different reason.

Joint strength test

Jimmy thanks for the tip. I followed up with a second test applying glue to the dominoes and the mortises. The board length was reduced by 2" to

SC Pig-Picking