Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Today, 12:14 PM

Cheap Bandsaw for Resawing
Thread Starter: Jimmy Harris
I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Edward Weber Today, 7:19 PM

Are they building standalone car washes like crazy in your area too?
Thread Starter: Brian Elfert
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: julian abram Today, 5:43 PM

Harvey Slider on Unisaw?
Thread Starter: John Kananis
All these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: John Kananis Today, 10:24 AM

Need ideas on waterproof board to cover water damaged base of outside doors
Thread Starter: Randall J Cox
I have two exterior doors, one to the back of my house and one to my tool shed. Both are showing the effects of winter water splashing up on them at the base. The door to my shed is really bad. I don't want to replace the doors but would like to put a board over the base, like a kickplate to...
Last Post By: Stan Calow Today, 9:20 AM

Epoxy glue joint opened
Thread Starter: Mark Gibney
I glued up this oval Santos mahogany coffee table on Sunday. Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week. The center seam opened up. I used brand new T-88 epoxy with...
Last Post By: Mark Gibney Today, 6:33 PM

Lyle Moore

There is no available content written by Lyle Moore

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

Which 3M Versaflo? Or?

HIK has a much nicer belt (but i had spare leather belts) and a particulant pre-filter to help extend the HEPA life. I've just been using the HEPA without
Earl McLain Today, 7:45 PM

Planar knives, bessey, bridge city tool works, starrett, and veritas tools 75 % off

Update:

-3 bessey deep clamps: $200 for all 3
1. Black 24” x 12”
2. Black 24” x 10”
3. Blue 20” x 12”
- 1 veritas
Joseph Erthal Today, 7:39 PM

Trying to Find Part for my Tripod

They make heat shrink anti-slip tubing for fishing rods that would probably work. Example: https://www.amazon.com/Greatfishing-...09&sr=8-5&th=1
Paul F Franklin Today, 7:39 PM

Not Recommended Jaws!

Guys, I'm relatively new to wood turning as I've been doing it for about 5 years now as a hobby. I have a Jet 1221 and a few Nova G3 chucks. I've been
Art Dilione Today, 7:28 PM

Dewalt DW735 Planer for short hardwood boards?

I just have the stock planer and it has been fine for me. The stock blades are easily resharpened for less than a buck an inch and sand paper can easily
Thomas McCurnin Today, 7:20 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Lyle Moore

Recent Polls

Recent Forum Posts

Recent Blog Posts