• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Clarence Martinn

    Which Air Filtration is Better??

    Thread Starter: Clarence Martinn

    The Grizzly G0738 or Shop Fox W1830 - Hanging Air Filter The tools that create the most airborne dust , are my Wood Lathes. The old Air filtration system I had, was an old Ridgid Canister air filter. They don't make those anymore. So, looking for a similar ...

    Last Post By: Alan Lightstone Today, 8:46 AM Go to last post
    John Terefenko

    Electric Cars

    Thread Starter: John Terefenko

    For those that own electric cars a few questions?? Do you like your choice as opposed to having a gas operated one? Would you do it again? Did you have to make changes to your insurance plans, both vehicle and home? If so what? Being there is a higher risk with battery fires from charging and now...

    Last Post By: Perry Hilbert Jr Today, 11:58 AM Go to last post
    Christopher Charles

    NBSS Tool Chest Build

    Thread Starter: Christopher Charles

    Hello all, I'm currently in the middle of a shop renovation and have not had any real quality shop time in months. Let's just say that 'drywall' is a four letter word right now... More than a year ago, I decided to build a tool chest to go under my bench, prior to moving shops. The carcass...

    Last Post By: Mike Allen1010 Yesterday, 6:50 PM Go to last post
    Cliff Polubinsky

    Disappointed with TS 55

    Thread Starter: Cliff Polubinsky

    I recently sold my Dewalt track saw and bought the Festool TS 55. Yesterday was the first time I used it. We were cutting 4 - 16" x 8' 8/4 Sapele slabs to fit them through my 12" planer. I was surprised when the saw didn't cut all the way through the slabs, it was 1/8" short. I ended up using the...

    Last Post By: Brian Holcombe Yesterday, 8:29 PM Go to last post
    Ron Hampe

    Laguna vacuum pumps

    Thread Starter: Ron Hampe

    Are they worth buying? They have a 2.5hp (109cfm/3.7"Hg) single phase for $900 and I would need 3 or 4 of those for my 49" x 98" table. By installing these with an isolated zone for each I believe the advantage would be a lower operating costs when cutting smaller parts. They also have a...

    Last Post By: joe f griffin Today, 10:16 AM Go to last post
    Scott DelPorte

    6" dia blade on a SawStop?

    Thread Starter: Scott DelPorte

    I want to get an ultra thin kerf (0.023") blade for slotting fretboards on my table saw. The only blades I have seen are 6" in diameter, and I think 8" is the minimum diameter they make a brake for on the SawStop. Does anyone know a way to run a smaller blade on this machine? Thanks Scott

    Last Post By: Robert London Today, 10:05 AM Go to last post
  • Jon Klubertanz

    There is no available content written by Jon Klubertanz
  • Recent Polls

  • Recent Forum Posts

    Perry Hilbert Jr

    Electric Cars

    Recently met an elderly guy (I am 70, he was upper 80's) riding an electric bike. He was going by my house, had just completed a long up hill and was

    Perry Hilbert Jr Today, 11:58 AM Go to last post
    Russell Hayes

    Performax drum sander adjustment

    Yes that's the ones. Not sure what else it could be. Do have a manual that tells how to adjust the set screws and everything. I have one.

    Russell Hayes Today, 11:54 AM Go to last post
    Grant Wilkinson

    SD card missing pictures

    Were you ever able to see them on the card? If so, and if you have a card reader for your PC, you may be able to recover them. I've had good luck with

    Grant Wilkinson Today, 11:50 AM Go to last post
    Dean Coss

    Performax drum sander adjustment

    If you’re talking about these bolts that ride up and down in the slot, then yes they are loose.

    Dean Coss Today, 11:47 AM Go to last post
    Brent Franker

    Does CerMark go bad?

    This will probably be the last spray one I buy. I'll try what you are saying.

    I bought some stuff on eBay years ago for under $10 and it

    Brent Franker Today, 11:42 AM Go to last post
  • Recent Blog Posts