Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

new bandsaw wont' cut straight
Thread Starter: Forrest Gon
My first bandsaw, a new rikon 10-3061, set it up according to the manual and various youtube tutorials such as Alex Snodgrass's method (align the blade, tension the blade, thrust bearings and side guides) Now the issue is: the saw just won't cut straight, it will pull the wood off the fence...
Last Post By: Randy Heinemann Today, 12:40 PM

I think my zero turn mower is cursed!
Thread Starter: Brian Elfert
I bought a used 2019 Grasshopper diesel zero turn mower with 189 hours on it last summer. I had all kinds of problems with it initially including a starter that didn't always turn over. I realized after I bought it that the mower had been buried pretty deep in mud or something as the dashboard...
Last Post By: Brian Elfert Yesterday, 2:30 PM

Teach us about rasps and floats
Thread Starter: Keegan Shields
There is a ton of info on the web about the more common woodworking hand tools (chisels, planes, saws) but what about rasps and floats? What’s the difference in application? How do these tools fit into the tool continuum from axe to sandpaper? What brands and models would you recommend to...
Last Post By: Stephen Rosenthal Yesterday, 4:42 PM

Help Me Pick a Plow Plane or Is It a Plough Plane
Thread Starter: Thomas McCurnin
Typical use will be on 3/4 to 7/8" stock planing on edge for a a 1/4" groove about 3/8" deep for frame and panel construction. I'll also be using it for grooving a post, usually about 1.5" x 1.5" is typical, again to accept a panel for frame and panel construction. It needs to go both directions,...
Last Post By: Tony Shea Yesterday, 5:16 PM

Solid Walnut bookshelf dados - is glue enough?
Thread Starter: Bill Brammer
Building 6 ft high, 28 in wide, 12 inch deep solid 3/4 inch walnut bookshelf , no adjustable shelves. I have dados for all shelves. The sides are a little bowed, requiring some pressure with clamps to pull them together with the dados. Not a ton, but some. I'm trying to decide if I need to add...
Last Post By: Tom Bender Yesterday, 6:51 PM

3-Phase vs Single Phase Equipment
Thread Starter: Michael Zerance
My new location does not have 3-phase service so I will be installing a phase converter to power my sanders, spray booth fan, and some other smaller pieces of equipment. I am leaning hard towards the Phase Perfect. For new equipment purchases, when there is an option for either single phase or...
Last Post By: Jonathan Jung Yesterday, 10:41 PM

Brent Cutshall

There is no available content written by Brent Cutshall

Recent Polls
Recent Forum Posts

Thickness planer board return ideas

Plus one on a cart. Why lift the material up over the machine?
johnny means Today, 1:40 PM

how are these table legs rounded over?

That could be veneer.

Maurice Mcmurry Today, 1:36 PM

Only one mortise chisel?

My little collection...skinny sash mortise chisels up to 12mm...

last project was a "Shaker" style table....and I used
steven c newman Today, 1:27 PM

Fiber laser without galvanometer

I have a rather unique application I want to try. I am wanting to mark wood that is on a moving conveyor using a fiber laser. We tried it out using
Tom Hickerson Today, 1:27 PM

Incra Jig Ultra

Asking $160. Hoping to find an area buyer. All the templates are there. Photos messed up if interested I can message them

Michael Weber Today, 1:12 PM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Brent Cutshall

Recent Polls

Recent Forum Posts

Recent Blog Posts