Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something.
I ran across this in a magazine ad.
The furniture is supposedly solid teak, though I don't think that will be in the cards for...
I'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
They are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
I glued up this oval Santos mahogany coffee table on Sunday.
Yesterday morning, Tuesday, I placed it outside under cloudy skies in the hope that the UV to hasten the darkening of wood surface before finishing later this week.
The center seam opened up. I used brand new T-88 epoxy with...
My landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
https://www.ktnv.com/news/park-rangers-looking-for-two-vandalism-suspects-at-lake-mead-national-recreation-area
What the ____ is wrong with some people?
Trying to get the nut off holding the pulley. It is not a hex but round with 4 slots on it. Thinking I need to make a socket or has anyone found one to
I have a Powermatic DS20 that is similar to what you describe also on start up only. I think it is a current inrush that causes it. With mine it is closer
Sections
Recent Articles
Recent Article Comments Widget
Recent Polls
Recent Blog Posts
How to bend wood like this - Outdoor furniture project
Thread Starter: Alan LightstoneLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Michael Burnside Today, 11:31 AM