I'm looking at getting a pair of bucket hooks: https://www.bxpanded.com/BX-bucket-hooks I like the fact they can be removed when not needed. I will use it mostly for lifting logs and pulling them out of the woods as well as sometimes lifting heavy items. Most of the time I'll use a chain which...
Last Post By: Edward Weber Yesterday, 3:16 PMI am converting my downdraft sanding table to a duel purpose downdraft/paint booth. Basically I have a 3'x5' downdraft bench on wheels with an old furnace blower to draw the sanding dust thru the table and out thru furnace filters. With my sander hooked to my Festool dust extractor, it does a...
Last Post By: Leigh Betsch Yesterday, 8:04 PMTypical use will be on 3/4 to 7/8" stock planing on edge for a a 1/4" groove about 3/8" deep for frame and panel construction. I'll also be using it for grooving a post, usually about 1.5" x 1.5" is typical, again to accept a panel for frame and panel construction. It needs to go both directions,...
Last Post By: Derek Cohen Today, 1:55 AMHad those planks of Ash....four at 7/8" x 5-1/2" x 77" and one at 7/8" x 5-1/2" x 48"......and figured I could try to build a Shaker Style Table, complete with a drawer....I remember way back when, during the New Yankee Workshop days, that Norm built such a table. Have to go strictly by memory,...
Last Post By: John Kananis Today, 12:52 AMI just saw an ad for 7 rusty saws for $25 and I may not be able to resist. One has the thumbhole but broken horn. It might be worth buying the whole lot but I'll have to get better at cleaning them up. I hate the mess. Hopefully someone will buy them before I decide to bite the bullet.
Last Post By: Maurice Mcmurry Yesterday, 5:46 PMNever used!! you can tell by the photos this miter gauge was never used. The adhesive backed measuring tape, adhesive backed "slick guide"
Ricc Havens Today, 11:32 AMLove the grain match on top along with the small breadboards. Very nice look!!
Bob Riefer Today, 11:26 AMYou are the first person I've heard of doing that. Have you damaged a chuck that way in the past?
Richard Coers Today, 11:21 AMReducing labor costs is the fastest way to make money in a business. Moving pieces from the track saw station to the table saw takes time and possible
Richard Coers Today, 11:16 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 11:09 AM