• Recent Articles

  • Recent Article Comments Widget

  • Hottest Threads

    Clarence Martinn

    Which Air Filtration is Better??

    Thread Starter: Clarence Martinn

    The Grizzly G0738 or Shop Fox W1830 - Hanging Air Filter The tools that create the most airborne dust , are my Wood Lathes. The old Air filtration system I had, was an old Ridgid Canister air filter. They don't make those anymore. So, looking for a similar ...

    Last Post By: Alan Lightstone Today, 8:46 AM Go to last post
    Christopher Charles

    NBSS Tool Chest Build

    Thread Starter: Christopher Charles

    Hello all, I'm currently in the middle of a shop renovation and have not had any real quality shop time in months. Let's just say that 'drywall' is a four letter word right now... More than a year ago, I decided to build a tool chest to go under my bench, prior to moving shops. The carcass...

    Last Post By: Mike Allen1010 Yesterday, 6:50 PM Go to last post
    Cliff Polubinsky

    Disappointed with TS 55

    Thread Starter: Cliff Polubinsky

    I recently sold my Dewalt track saw and bought the Festool TS 55. Yesterday was the first time I used it. We were cutting 4 - 16" x 8' 8/4 Sapele slabs to fit them through my 12" planer. I was surprised when the saw didn't cut all the way through the slabs, it was 1/8" short. I ended up using the...

    Last Post By: Brian Holcombe Yesterday, 8:29 PM Go to last post
    Ron Hampe

    Laguna vacuum pumps

    Thread Starter: Ron Hampe

    Are they worth buying? They have a 2.5hp (109cfm/3.7"Hg) single phase for $900 and I would need 3 or 4 of those for my 49" x 98" table. By installing these with an isolated zone for each I believe the advantage would be a lower operating costs when cutting smaller parts. They also have a...

    Last Post By: joe f griffin Today, 10:16 AM Go to last post
    Scott DelPorte

    6" dia blade on a SawStop?

    Thread Starter: Scott DelPorte

    I want to get an ultra thin kerf (0.023") blade for slotting fretboards on my table saw. The only blades I have seen are 6" in diameter, and I think 8" is the minimum diameter they make a brake for on the SawStop. Does anyone know a way to run a smaller blade on this machine? Thanks Scott

    Last Post By: Robert London Today, 10:05 AM Go to last post
    Luke Dupont

    Questions about Scandinavian Benches, etc.

    Thread Starter: Luke Dupont

    Hi guys, I've been contemplating starting back up my apartment woodworking endeavors, which were so costly and difficult before. But, I like making things... So, I'm ordering some chisels, a bit and brace, and an antique dovetail saw and No. 2 Stanley Bailey (Expensive, but I'm not going to be...

    Last Post By: William Fretwell Yesterday, 7:17 PM Go to last post
  • Wayne Brooks

    There is no available content written by Wayne Brooks
  • Recent Polls

  • Recent Forum Posts

    Russell Hayes

    Performax drum sander adjustment

    Yes that's the ones. Not sure what else it could be. Do have a manual that tells how to adjust the set screws and everything. I have one.

    Russell Hayes Today, 11:54 AM Go to last post
    Grant Wilkinson

    SD card missing pictures

    Were you ever able to see them on the card? If so, and if you have a card reader for your PC, you may be able to recover them. I've had good luck with

    Grant Wilkinson Today, 11:50 AM Go to last post
    Dean Coss

    Performax drum sander adjustment

    If you’re talking about these bolts that ride up and down in the slot, then yes they are loose.

    Dean Coss Today, 11:47 AM Go to last post
    Brent Franker

    Does CerMark go bad?

    This will probably be the last spray one I buy. I'll try what you are saying.

    I bought some stuff on eBay years ago for under $10 and it

    Brent Franker Today, 11:42 AM Go to last post
    Brent Franker

    Does CerMark go bad?

    Wow. Ok, if the Cermark gets THAT HARD in the bottom then that could definitely be my problem because I only shook it for a minute or two like you would

    Brent Franker Today, 11:39 AM Go to last post
  • Recent Blog Posts