Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Edward Weber Today, 2:41 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Robert Hayward Today, 8:03 PMMy doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...
Last Post By: Ken Fitzgerald Today, 8:51 PMHot water travels about 60 feet from the tank to our upstairs bathroom and it takes too long to get there. I'm thinking about installing a point-of-use heater with a mini-tank but don't know if it will do what I want. Can I install a 2.5 gallon POU heater in the hot water supply to the bathroom and...
Last Post By: Mike Henderson Today, 6:44 PMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Curt Harms Today, 9:52 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 51)
Call back and ask to speak to an enforcement official/inspector.
I actually had one come out to do a "prebuild inspection" where
Michael, the sounds you hear are normally caused by the gradient coils changing the main magnetic field in a precise way.
Have you ever
The person at the office said she doesn't know, just ordnance rule. I am going to dig into it further, she says I can apply for a variant for 300.00.
Tim Elett Today, 8:39 PMDid you ask the ordnance enforcement people? Whenever I have wanted to do something that must be to code, they have always provided clear, concise reasoning
Ken Fitzgerald Today, 8:17 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 1:36 AM