I need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...
Last Post By: Bob Turkovich Today, 2:32 PMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Zachary Hoyt Today, 12:47 PMI have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: John Kananis Today, 3:13 PMThis is a follow up to an earlier post about how to create an aged maple finish on a table I'm making of maple and mahogany. Based on the input I got in that post I tried several approaches. - Waterlox OSF by itself does a pretty good job of giving maple an aged look. The think I didn't like...
Last Post By: Patrick McCarthy Today, 1:04 PMMy cottage is on well water. Several years ago we started with the dreaded sulfur smell, hot water only. I had a plumber replace the anode. Smell came back eventually. I found the model of the anode he installed and see that is just aluminum. Seems like the one I need is aluminum/zinc? Has...
Last Post By: Bruce Wrenn Yesterday, 8:29 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Grooves have been run...over on the tablesaw...as the fence makes using this a bit rough..
Rails are 1-3/8" wide...not enough left to
Thanks everyone, I'm starting to get the hang of it actually. And thanks for the suggested watch list. I've seen most of the content from those sources
John Kananis Today, 3:13 PMSold sold sold
Phil Gaudio Today, 2:42 PMPlease show me the model slide you intend to use, I've never seen a rack and pinion table slide. The wear WILL be inside the slides, not should be. The
Richard Coers Today, 2:39 PMGeez, Rick. It only took you four pages until you got to what you really wanted to talk about... (That's about as far from a self-driving Tesla as you
Bob Turkovich Today, 2:32 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Yesterday, 3:45 PM