Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

Are your tools dangerous?

Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...

My new bandsaw, I hope...

I had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...

Major upgrade- Grizzly 24” bandsaw has arrived

I will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....

Shop tidbits...

A few weeks ago, the mowing season began here. While in the shed, I was looking for something and checking the open containers on the bench in there and I noticed a right-angle adapter. Looking at it, I couldn't figure what it fit. I put it back into the container and continued the search for...

Random Orbital Sanders (again)

I looked at Sawmill Creek threads from 2020 until now. I figured that tool costs, availability and opinions change after 4 or more years. Over that time, there were favorable comments about Festool, Bosch and Mirka. My typical use is flat surfaces on cabinet faces and panels, not many edges...

Major upgrade- Grizzly 24” bandsaw has arrived

**** UPDATE ***** There was a problem- Grizzly did respond and sent parts.

I waited to do this update, because I wanted to give Grizzly

Bogus Norton Anti-Virus purchase

The real Norton is a scam as it loads almost as much cr** as Microsoft Windows

Drawer slides - full extension - adjustments possible?

My suggestion is similar to Jim's if I'm following. That said, the first thing I would do is measure the carcass and drawer to see if anything is out

Cantilevered Desk

For the spline, it's basically just routing a channel in the vertical leg at the back and a similar channel through the end of the upper support (right

Amazon is selling a square ( 6” by 4 and 5/16ths)

How about this?

SC Pig-Picking