Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

Are your tools dangerous?

Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...

How much does a shop build add to property value?

For those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

Point of Use Hot Water Heater Questions

Hot water travels about 60 feet from the tank to our upstairs bathroom and it takes too long to get there. I'm thinking about installing a point-of-use heater with a mini-tank but don't know if it will do what I want. Can I install a 2.5 gallon POU heater in the hot water supply to the bathroom and...

Major upgrade- Grizzly 24” bandsaw has arrived

I will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....

MRI Question

My father also died too soon, but he smoked and didn't really take care of his health. I've survived long past his death age.

Mike

Cross Cut Sled

Ng's the man. steps are easy to follow, sled is accurate. Every stage of squareness matters. Plus, he’s goofy.

Splurge and use high

Am I the only one waiting for my Starrett from Rockler

If you get tired of waiting, consider a PEC 6 inch combination square. I found a blem here.

My experience with PEC blem tools has been very

Cross Cut Sled

Any one have one? or tried it yet?

Spraying Enduro Var II

I feel like I should chip in for the cost you have in the finish you two have convinced me to stay away from. Many thanks!

SC Pig-Picking